Dispenser

 Introduction

The peristaltic glue dispenser is also called the precision glue dispenser, because it can precisely control the amount of glue output, and it is also a device used to dispense instant glue. Due to the nature of the glue, the equipment is different from the traditional dispenser equipment in terms of material. Partial parts made of special Teflon tube are used, which effectively avoids the problem of glue blockage and is ideal for dispensing Craft.

Scope of application

Anaerobic glue, instant adhesive, flux, silicone oil, thread glue, solvent, ink, paint, UV glue and light curing glue.

Features

Time controls the amount of glue, with high repeatability and stability.

  It is convenient to switch between forward and reverse and has good self-priming ability.

The pipeline installation is convenient, the fluid does not touch the pump body, and there is no pollution.

Suitable for low-viscosity glue, the viscosity is generally below 5000CPS.

Without external air pressure, the liquid is directly sucked and the liquid is delivered through the rotor part.

 Device parameters

 Principle explanation

Structural principle: The peristaltic pump head is divided into two parts: the rotor and the pump casing. The pump tube is fixedly placed between the rotor and the pump casing, and the runner compresses the pump tube in the pump.

Movement principle: The motor drives the rotating shaft to rotate, and the runner on the rotor runs over the pump tube in turn, pushing the fluid in the tube forward. The pump tube after the runner runs back to its original shape due to its own elasticity, and a vacuum negative pressure is formed at the suction end of the pump tube, and the liquid is sucked in due to the vacuum negative pressure, so that the dispensing operation is performed.

Inlet                                                                             出料口

出料口